Can I change the notification settings?
Tap on the notification bell at the top of the home screen. From here select notifications. You can then choose your general notification settings as well as individual settings for each type of notification.
FAQ
Why isn’t the control panel found when I try to add a new device?
If your control panel is not found when you try to add a new device, it may not be in discovery mode. The control panel should display “Discovery Mode. Press OK to exit”. If this is not displaying, use the arrow buttons to navigate through the menu to the Wifi option, and then press and hold OK to re-enable discovery mode. Alternatively, you can perform a factory reset – note this will erase any settings you have customised on the control panel
Can I change the WiFi network?
Tap into Door settings for your Door, Select “Update Wi-Fi”. Whilst on this page in the App, On your Control Panel navigate to Wi-Fi in the menu and press and hold ok.
Depending on your firmware version, the screen may show “Enabled”. If this is the case change the selection to “Discovery Mode”, and then press and hold “OK”
Once the control panel displays “Discovery Mode” press the connect button on your app screen.
How do I change the door settings in the app?
To change the door settings, tap on the settings icon in the top right of the door card on the home screen. From the menu that appears, tap the top item “Door settings”. For more details on the settings available, please see Setting when your Smart Autodoor will open and close
How do I move a device to a different coop?
You can move a device to a different coop by selecting the Settings icon on the top right of the device. You should then select “Device Details. You can then change the “Assigned to:” to the correct coop.
Click the settings icon
Click “Device Details”
Select the correct coop from the “Assigned to:” box
How do I add a new coop?
You can add a new coop by clicking the menu icon on the top right. You should then select “Manage and share coops”. You can then click the “Add coop” button.
How do I add another device?
You can add additional devices by following the same process. Ensure the device is in discovery mode, and then go to Add Device within the app. For full instructions, see our article on Connecting your Smart Autodoor to the Omlet App
What happens if the door loses connection to the Wi-Fi?
Your Door settings are saved locally to the control panel. So even if your network drops out the Door will continue to use these settings to open and close. You just won’t be able to control the device via the app whilst the Wi-Fi is down.
How long is the mains cable?
The mains cable you receive with the door is 5’10”
Do I have to use the app?
The new Omlet Smart Autodoor has all of the same functionality as the previous version of the Autodoor if you do not wish to connect it to wifi and use the app to control it. When the control panel is first powered on, it will enter Discovery Mode. Simply press OK on the control panel to exit discovery mode, and you can use the control panel offline as before.
Connecting the control panel to wifi and the Omlet App allows you to receive notifications that your door has opened and closed as expected, and control the door from wherever you are in the world, giving you the peace of mind that your chickens are safe and secure, whether you’re on the sofa, running late at work, or enjoying the sun on a vacation thousands of miles away
Please see our article about upgrading the firmware if you plan to not use the app, and run the control panel on battery power
How far away from a wifi source can the door be placed?
The range of your wireless network can be affected by a number of factors, including the type of access point used, and the construction of your home. As such, it is not possible to give a general answer to this question. We recommend connecting to the wireless network you wish to use with your phone, and standing where you wish to place your control panel. If your phone indicates a good wifi signal, it should be sufficient to use with the Omlet Smart Autodoor. If your phone only shows one bar of wifi, or none at all, then you could find the signal is too weak for the control panel to work effectively. You may wish to move the coop or access point to improve coverage, or purchase a range extender
Can I share access to my door?
You can invite anyone you like to have access to your Smart Autodoor via the Omlet App, and decide what level of access to give them. For more details, see our article on Sharing your Smart devices with friends and family
Do I have to use Mains power for Smart?
You do not have to use mains power if using the smart features of the new Omlet Smart Autodoor control panel. We do however recommend it where possible, as it will improve the functionality of the product. Using mains power will enable the control panel to maintain a constant wifi connection, meaning when you send a command to the door, it will be performed almost immediately. On battery you will have to wait up to 10 minutes for the next time your control panel wakes up and checks in with our servers.
When running on battery with the recommended power settings, we estimate you should expect 2+ months of battery life with normal usage before you need to replace the batteries.
How do I download the app?
The Omlet App is available in the Google Play store for Android users, and the App Store for iOS users. Simply open the relevant app store, and search for “Omlet”, or use the following links: iOS App Store – Google Play
Can the wire to the control panel be extended?
We don’t provide any solution for extending the cable, but we do sell a replacement cable that could be used for that purpose. If you want to extend the cable we suggest you speak to an electrician to make sure it’s done safely and correctly.