Power Cut Reset

After experiencing a power cut, or changing batteries, your control panel clock will be reset.

If your control panel is connected to wifi, then it will automatically resynchronise the time over the internet, and continue to work as normal.

If not, the control panel will revert to light mode to ensure that an incorrect clock does not lead to the door opening in the middle of the night, or closing in the middle of the day. If you experience a power cut and are not using Wifi, the control panel screen will display the message “Power cut reset”. You will need to:

• Press OK to dismiss this message,
• Change the Mode back to Time,
• Reset the clock to the current time.

Your previously set open and closing times will have been retained, so your door will then operate as before.